Etusivu > Uutiset > Sisältö

Onko suolasumutesti luotettava?

Jan 24, 2022

Red Rust Corrosion

Salt spray test has been recognized for ranking the performance levels of coating systems. Yet, there is little correlation between results from standard salt spray tests and real-life anti-corrosion performance. In particular, it will not be able to give accurate assessment for galvanized coating because the continual wetness during the salt spray test does not allow this passive oxide and carbonate layer to develop, and this adherent layer protects the zinc from corrosion meanwhile zinc protects the substrate steel from erosion. When coated material is evaluated by the salt spray test, but it does not have ultraviolet light which will cause deterioration for paints and primers. Therefore, using salt spray test results to guide the selection of protective coatings for steel is quite a serious problem in the engineering field. Despite the well understood limitations of the test, many project designers use the salt spray test result as a guideline to choose their favorite coatings. For decades, this test has generated misleading information about coating performance and its results still feature prominently in the marketing materials of products that yield more favorable outcomes than in practical world. This article is meant for giving some insight into the limitations of this type of accelerated testing. 

What is salt spray test? 


Salt Spray Test

There are two types of salt spray tests in common use, neutral and acetic acid, but neither of these does what we want in a test, which is to replicate nature on an accelerated time basis. It's also called salt fog test which is standardized and popular corrosion test solution, and it's used to check corrosion resistance of materials and surface coatings. Usually, the materials to be tested are metallic and finished with a surface coating which is intended to provide a degree of corrosion protection to the underlying metal. It is an accelerated corrosion test that produces a corrosive attack to coated samples for assessing the effectiveness of the protective coating. The appearance of corrosion is evaluated after a certain period of time, and test duration depends on the corrosion resistance of the coating. Generally, the more corrosion resistant the coating is, the longer the period of testing before the appearance of corrosion or rust. The salt spray test is one of the most widespread and long-established corrosion tests, and ASTM B117 was the first internationally recognized standard which was published in 1939. The other important relevant standards are ISO 9227, JIS Z 2371 and ASTM G85. 

Let's take a look at the testing process first. The salt spray procedure involves the spraying of a salt solution with 5 percent salt (sodium chloride) onto the samples, and the test is done inside a temperature-controlled chamber. The temperature within the chamber is maintained at a constant level, and the samples are constantly subject to the saltwater spray, and the testing procedure of ASTM B117 is listed below:  
√  Placing wooden in the chamber  
√  Aseta näytteet puiselle telineelle pienessä kallistuskulmassa
√  5 % NaCl vesijohtovedessä, joka pumpataan säiliöstä suihkutussuuttimiin
√  Liuos sekoitettuna kostutettuun paineilmaan suuttimissa
√  Paineilma sumuttaa NaCl-liuoksen sumuksi suuttimissa
√  Lämmittimet ylläpitävät 95 asteen kaapin lämpötilaa
√ Testin kesto voi olla 24 tunnista 1000 tuntiin ja näytteitä pyöritetään usein, jotta kaikki näytteet altistuvat mahdollisimman tasaisesti suolasumulle.

Kun suolasumutestiä käytetään metallipinnoitetun -teräslevyn testaamiseen, korroosion suorituskyky arvioidaan seuraavilla tavoilla:
√  Nro tuntia ennen kuin teräksen ruostuminen on havaittavissa
√  Nro tuntia, kunnes 5 prosenttia pinta-alasta on ruostunut
√  Nr. of hours until 10 percent of the surface area is rusted 

Maalien esikäsittelyjen, pohjamaalien tai pintamaalien suorituskyvyn arviointia mitataan seuraavilla kriteereillä:
√  Maalin alileikkauksen leveyden mittaaminen joko maalattua viivaa pitkin maalin läpi tai leikatusta reunasta 250, 500 tai 750 tunnin altistuksen jälkeen testikammiossa
√  Maalatun teräslevyn pinnoilla tapahtuneen maalin rakkulaisuuden mittaaminen 250, 500, 750 tunnissa.

Why is salt spray test misleading? 

Kuten saatat olla tietoinen, suolasumutesti (B117) ei sisällä altistumista ultraviolettivalolle, maalin haalistumista ja liituuntumista. Vaikka G85:ssä on useita muunnoksia, joihin liittyy syklisiä hapon ja SO2:n lisäyksiä, se ei silti voi korreloida ulkoilman suorituskykyyn kloridiilmakehässä. On kolme tärkeintä syytä, miksi suolasumutesti ei korreloi useimpien todellisten -altistusolosuhteiden kanssa.
√  The surface of the test samples is constantly wet, which does not happen in a real environment. 
√  The chamber temperature is constantly at 95 degree F, which increases water, oxygen and ion transport compared to the real atmosphere. 
√  The chloride content is at a very high level of 5 percent , preventing zinc from forming a passive film.  

Tietenkään ei ole reilua sanoa, että suolasuihkeella ei ole mitään arvoa, koska se tarjoaa kvantitatiivisen analyysin korroosionestotehosta-, ja siksi tätä testiä käytetään laajasti jauhemaalaus- ja maalausteollisuudessa pinnoitteen tarkistamiseen. materiaalin laatu. Jos esimerkiksi suolasumutestin normaali suorituskyky on 750 tuntia ennen korroosion alkamista, se on nopea tapa määrittää, onko tuotteen laatuun vaikuttavia suuria tuotantoongelmia. Testissä ei välttämättä voida päätellä, että tuotteen laatu on hyväksyttävä, mutta jos tämän testin suorituskyky ei ole standardin mukainen, ulkoilmasuorituskyky ei välttämättä myöskään ole niin hyvä kuin odotettiin. Ei ole yllättävää, että ISO 9227 suosittelee, että suolasumutestit soveltuvat vain laadunvalvontatesteiksi.

In short, salt spray test is not an accurate way of evaluation of corrosion resistance primarily because the salt spray destroys the mechanism that galvanized finish protects the steel by providing a barrier, and this barrier is also an important electrolytic protection. Due to this reason, the test result might lead to a false conclusion on how the galvanized finish will perform, which renders the test meaningless. No wonder, this test is now largely abandoned even by the automotive industry. 

Valitettavasti tämä testi on edelleen melko suosittu. Vaikka ISO 9227 sanoo selkeästi, että "suolasumun kestävyyden ja muiden väliaineiden korroosionkestävyyden välillä on harvoin suora yhteys, koska useat korroosion etenemiseen vaikuttavat tekijät, kuten suojakalvojen muodostuminen, vaihtelevat suuresti kohdatut olosuhteet." Jos projektin suunnittelija tietää, mitä suolasumutesti todella tarkoittaa, hän voi ymmärtää sen rajoitukset ja käyttää tuloksia harkitusti.

Mikä aiheuttaa korroosiota todellisessa ympäristössä?

The most common metallic corrosion is atmospheric. If metals like steel, copper, magnesium and aluminum are exposed to the atmosphere, they react with free-flowing air and moisture to develop oxides. The atmospheric corrosion depends on five main factors: 
√  Lämpötila
√  Kosteus
√  Sademäärä
√  Rikkidioksidi, se muodostuu pääasiassa ilman saastepitoisuudesta
√  Air salinity. 

Mitään näistä tekijöistä ei voida pitää korroosion pääasiallisena tekijänä. Näistä metalleista on tehty laajoja tutkimuksia ja kunkin ennustettava korroosionopeus on selvästi arvioitu. Hiiliteräksen yleinen korroosionopeus seuraavissa mikro{0}}ympäristöissä voi huomattavasti ylittää nämä korroosionopeudet.
√  Maaperässä teräs altistuu erilaisille syövyttäville voimille aivan toisin kuin ilmakehän altistusolosuhteissa. Pelkästään Pohjois-Amerikassa on tunnistettu yli 200 erilaista maaperää, ja korroosionopeus määräytyy neljän päätekijän perusteella: maaperän lämpötila, kosteuspitoisuus, pH-taso ja kloridit. Jos jokin näistä puuttuu, korroosioreaktio lakkaa tai etenee hyvin hitaasti. Teräs syöpyy nopeasti happamissa ympäristöissä ja hitaasti tai ei ollenkaan alkalisuuden kasvaessa. Teräksen korroosionopeus maaperässä voi vaihdella alle 0,2 mikronista vuodessa suotuisissa olosuhteissa 20 mikroniin vuodessa tai enemmän erittäin aggressiivisessa maaperässä.

Corrosion Marine Environment

√  Marine or water, a less common environment for metal is submerged in or exposed to water. Moisture is highly corrosive to most metals including steel, aluminum, and zinc. There are many different types of water (pure water, natural fresh water, drinking water, and seawater, and each has different mechanisms that determine the corrosion rate. The parameters that affect corrosion of metals in water include pH level, oxygen content, water temperature, agitation, the presence of inhibitors, and tide conditions. Onshore areas of marine corrosion include docks, harbors, naval yards, where sacrificial anodes providing cathodic protection may be employed, as well as protective coatings such as marine paints and galvanization. Offshore oil and gas platforms are exposed to particularly aggressive corrosion from sea salt spray and immersion.

Corrosion Above Ground

Above ground,there are five important factors that are essential to atmospheric corrosion: moisture (dew condensation), temperature, humidity, aerosol particle deposition and pollutants. For instance, every 50 degree F (10 degree ) increase in the temperature can double corrosion activity. Another interesting phenomenon is that salt-rich environment and aerosols tend to have high levels of humidity. 

Ilmakehän korroosion ymmärtäminen on välttämätöntä, koska tämäntyyppiset vauriot ovat yleisimpiä erityyppisten korroosiovaurioiden joukossa, ja ne vaikuttavat sekä ulko- että sisäasennuksiin, kuten yhdyskuntateknisiin,infrastruktuurit, aurinkoenergiahankkeita, Televiestintäprojektit, maatalouden hankkeita, ajoneuvot,telakan rakentaminenja asuinrakenteet.



Lähetä kysely